• WSP2110

WSP2110 VOC Gas Sensor

  • • Detection Gas: toluene, methanol, benzene, alcohol, acetone &etc.
  • • Application: automatic exhaust device,air cleaner in domestic occasion for harmful gas detection.
  • • Application: air cleaner, fresh-air system, IAQ system

We're here to help: Easy ways to get the answers you need.

Share With:
Principle Introduction:
Winsen Electronics, research and produce air quality monitoring gas sensor for home and office air cleaners, and fresh air system.
WSP2110 VOC gas sensoradopts multilayer thick film manufacturing technology. The heater and metal oxide semiconductor material on the ceramic substrate of subminiature Al2O3 are fetched out by electrode down-lead, encapsulated in metal socket and cap. Conductivity of the sensor is affected by the concentration of target gas.The higher the concentration is, the higher conductivity of sensor gets. Users can adopt simple circuit to convert variation of conductivity into output signal corresponding to gas concentration.
Applications :
It is used in automatic exhaust device,air cleaner in domestic occasion for harmful gas detection.
Technical parameters :
Model WSP2110
Sensor Type Semiconductor flat surfaced sensor
Standard Encapsulation Metal Cap
Detection Gas toluene, methanal, benzene, alcohol, acetone &etc.
Detection range 1~50ppm
Standard circuit Loop voltage VC ≤24V DC
Heating voltage VH 5.0V±0.1V AC or DC
Load resistance RL Adjustable
sensor features in standard test condition Heating resistance RH 90Ω±10Ω(Room Tem.)
Heating consumption PH ≤300mW
Surface resistance RS 10KΩ~100KΩ(in 10ppm toluene)
Sensitivity S Rs(in air)/Rs(in 10ppm toluene)≥3
Concentration slope α ≤0.6(R50ppm/R5ppmtoluene)
Standard condition of test Temperature, humidity 20℃±2℃;65%±5%RH
Standard test circuit VC:5.0V±0.1V; VH :5.0V±0.1V
Warm-up time More than 120 hours
Reference Circuit :
 

Please fill in your procurement needs and contact information