Target: PM2.5
Model: ZPH04B
Detection range: 0-500ug/m3
Detection principle: IR
Characteristics: Good Stability for long time,Easy to install and use
Size: 59×45×20mm(L×W×H)
Output signal: UART / PWM

ZPH04B Manual download
Get Price Whatsapp

Description

This sensor integrates infrared PM2.5 detection technology, using particle counting principle to detect PM2.5 in the environment. It can detect the particles (diameter ≥1μm).
Before delivery, the sensor has been aged, debugged, calibrated and has good consistency and high sensitivity.

Application

  • Air Purifier
  • Air Refresher
  • Civil and Commercial AC
  • HVAC System
  • AC System
  • Smoke Alarm System

Features

  • Good Stability for long time
  • Easy to install and use
  • Interface output is multiple
  • High Sensitivity
  • Good Consistency
  • Modular design & Anti-interference

Specifications

Model ZPH04B
Working voltage range 5±0.2 V (DC)
Output Mode UART / PWM
Output signal voltage 4.3±0.2 V
Detection ability Smallest particles 1 μm diameter
Detection range 0-500ug/m3
Consistency ±25% or ±25ug/m³
Warm-up time 1min (Device warming-up time)
Working current ≤150mA
Humidity Range Storage ≤95%RH
Working ≤95%RH
Temperature Range Storage -30℃~50℃
Working 0℃~50℃
Size 59×45×20mm(L×W×H)
Physical interface EH2.54-5P(Terminal socket) 

* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.

Technical Support:

Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.

The sensors don't have sleeping mode. It can be set in program if needed.

All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.

The sensor has been fully tested (not calibrated) before leaving the factory. However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.

15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.

Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.

Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.

Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com

Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.

LEADING GAS SENSING SOLUTION SUPPLIER

RELATED PRODUCTS