ME4-ETO Ethylene Oxide Gas Sensor
|Detection range:||0-20ppm, Max 100ppm|
|Characteristics:||Detection of ethylene oxide in petroleum and petrochemical, pharmaceutical and environmental protection fields|
Resolution ratio 0.1ppm
Bias voltage 300mV, Anticipated using life 2 years
ME4-ETO ethylene oxide gas sensor is constant potential electrolysis type. Oxidation-reduction reaction with ethylene oxide gas take place inside of the sensor. The process releases electric charge and generates current. The current is in direct proportion to the concentration of ethylene oxide gas. So the concentration of the target gas could be got by measuring the value of current.
For ETO gas detection in petroleum and petrochemical occasion, medicine and environmental protection field.
- Low power consumption
- High precision
- High sensitivity
- Wide linear range
- Good anti-interference ability
- Excellent repeatability and stability
|Detection gas||Ethylene Oxide (ETO)|
|Response time (T90)||＜120S|
|Load resistance||10Ω (recommended)|
|Repeatability||＜2% Output value|
|Zero drift (-20℃～40℃)||4ppm|
|Humidity range||15%～90% RH (No condensation)|
|Pressure range||Standard atmospheric pressure±10%|
|Life span||2 years|
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory. However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with UL, CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to firstname.lastname@example.org
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
LEADING GAS SENSING SOLUTION SUPPLIER
ZW-RCl101 residual chlorine water quality sensor module
Low power consumption, high precision, linear output, easy calibration and good stability.VIEW MORE
Electrochemical HCHO Formaldehyde Sensor Module ZES10-CH2O
High sensitivity &resolution, Good stability,Low power consumption, Excellent Linear outputVIEW MORE
FR08-H0A Thermal Mass Gas Flow Sensor
MEMS thermal principle
Modular design, New generation of MEMS sensor chipVIEW MORE
MR007 CH4 Methane C3H8 Propane Gas Sensor
Increased stability, high accuracy, high sensitivity, great linearity and repeatabililtyVIEW MORE
Electrochemical Carbon Monoxide Gas Sensor Module ZE730-CO
High temperature resistance, fast response, low power consumption, high precision, long lifeVIEW MORE
Electrochemical HCHO Formaldehyde Sensor Module ZE08B-CH2O
High sensitivity &resolution, Low power consumptionVIEW MORE