| Target: | CO2 |
| Model: | MH-712B |
| Detection range: | 0～5% Vol optional |
| Detection principle: | non-dispersive infrared (NDIR) principle |
| Characteristics: | 1. High Sensitivity and resolution, low power consumption, fast response；2. Output method: UART, analog voltage output signal, etc. 3. Temperature compensation, excellent linear output；4. Good stability；5. Long lifespan；6. Anti-poisons, anti-vapor interfe |
| Size: | Φ39×44 mm |
| Working conditions: | 4.5～5.5V DC |
| Measurement range: |
0～2000 ppm 0～6000 ppm 0～1% Vol 0～3% Vol 0～5% Vol |
| Resolution and accuracy: | ±(50ppm+5% reading value) |
| Response time: | T90 ＜ 30 s |
| Notes: | This product has been discontinued |
MH-712B Manual download
Get Price Whatsapp
Description
MH-712B is a universal type intelligent sensor to detect CO2 in air taking advantages of non-dispersive infrared (NDIR) principle. With good selectivity, no oxygen dependence, stable performance and long lifespan features, MH-712B also has built-in temperature compensation feature. It is a compact and high-performance sensor based on infrared absorption of gas detection technology, micro-machining and sophisticated circuit design.
Application
Widely used for industrial field instrumentation, industrial-process control and safety protection
Features
- High Sensitivity and resolution, low power consumption, fast response
- Output method: UART, analog voltage output signal, etc.
- Temperature compensation, excellent linear output
- Good stability
- Long lifespan
- Anti-poisons, anti-vapor interference
Specifications
| Product Model | MH-712B |
| Target Gas | CO2 |
| Working Voltage | 4.5 V ~ 5.5V DC |
| Average Current | < 100mA |
| Interface Level | 3.3V |
| Measurement Range | 0~5%VOL optional (view table 2) |
| Output Signal | UART |
| 0.4-2V DC | |
| Warm-up Time | < 2min |
| Response Time | T90 < 30s |
| Working Temp. | -40℃ ~ 70℃ |
| Working Humidity | 0 ~ 95%RH, Non-condensing |
| Dimension | Φ39×44mm |
| Weight | 280g |
| Life Span | >5 years |
| Protected Class | IP54 |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory. However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
