WPCK07 Diffused Silicon Pressure Transmitter
|Detection principle:||Diffused Silicon|
|Output signal:||4-20mA(Defalt) 0.5-4.5V,0-5V,1-5V,0-10V,1-10V|
|Resolution and accuracy:||±0.5%FS|
|Pressure Reference:||Gauge Pressure/Absolute Pressure/Sealed Gauge Pressure|
|Diaphragm material:||SS 316L|
WPCK07 series diffused silicon pressure transmitter is integrated with high-precision diffused silicon pressure core, the internal special integrated circuit converts the sensor millivolt signal into a standard current signal, which can be directly connected with the computer interface card, control instrument, intelligent instrument or PLC, and the current output mode can be used for remote transmission. WPCK07 is a small size, light weight, all stainless steel sealed structure transmitter, which can be used in corrosive environment. The product has extremely high vibration and impact resistance and easily to install. I’s widely used in process control, automobile, medical equipment, HVAC and other fields
- Process control system
- Pressure calibration instrument
- Hydraulic system
- Biomedical instruments
- Hydraulic system and valve
- Refrigeration equipment and HAVC system
- Ships and navigation
- Pipeline pressure monitoring
- Stainless steel d4sturcture, multi thread structure
- Wide temperature compensation-10~+70℃
- Multi output methods
- Excellent anti-interference ability
- High reliability
- Hi Accuracy
- Low consumption
|PressureReference||GaugePressure/AbsolutePressure/Sealed Gauge Pressure|
|Temperature Drift||35kPa：±2%FS(0℃～60℃） Others：±1.5%FS(-20℃～85)|
|Response time||≤1ms||Up to 90%FS|
|Overload pressure||Refer to the pressure range chart|
|Working life||≥1×10⁶ Pressure cycle|
|Environment Temperature||≥1×10⁶ Pressure cycle|
|VibrationResistance||Impact：200g/1ms；IEC 60068-2-27 Free fall：1m；IEC 60068-2-32|
|Static electricity||IEC 61000-4-5 3 Level|
|Voltage Withstand||Current Output：500V/AC 1min Voltage Output：250V/AC 1min|
|Media Compatible||Various media compatible with 316L stainless steel|
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory. However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with UL, CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to email@example.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
LEADING GAS SENSING SOLUTION SUPPLIER
ZH10 Compact 4-in-1 Air Quality Sensor Module
Laser scattering principle
Good consistency,Miniature size,Low power consumption,Compatible with VOC and temperature and humidity output.VIEW MORE
MH-Z1542B-R32 Refrigerant Sensor Module
non-dispersive infrared (NDIR)
High sensitivity, high resolution, fast response,UART outputVIEW MORE
13 Carbon Dioxide PbSe Sensor REG-X2212-13CO2
photoconductive effect of semiconductor materials
TO-5 package, single channel/dual channel;Fast response;High detection rate;Window can be customized;VIEW MORE
RPFA913CG Pyro-electric Flame sensor
5.0um detection band;TO-5 package, single channel, voltage mode;Low microphone effect, large FOV, high detection rate;Detection band measurement of flame signal;VIEW MORE
RPFA913CF Pyro-electric Flame sensor
4.48um detection band;TO-5 package, single channel, voltage mode;Low microphone effect, large FOV, high detection rate;Detection band measurement of flame signal;VIEW MORE
RPFA913CE Pyro-electric Flame sensor
4.4um detection band;TO-5 package, single channel, voltage mode;Low microphone effect, large FOV, high detection rate; Detection band measurement of flame signal;VIEW MORE