| Model: | WPCK63 |
| Detection principle: | Diffused silicon pressure sensing |
| Characteristics: | Compact and lightweight design, integrated stainless steel structure, wide temperature compensation |
| Size: | Body length 61.0mm; housing diameter Ø23.5mm; M20×1.5 pressure thread with 16.0mm thread length |
| Working conditions: | 3.0-3.6V for I2C output; 3-24V for 0.2-2.3V output. |
| Output signal: | 0.2-2.3V or I2C; other output signals can be customized |
| Measurement range: | -100-0kPa, 0-10kPa, 0-20kPa, 0-35kPa, 0-70kPa, 0-100kPa, 0-160kPa, 0-250kPa, 0-500kPa, 0-1MPa, 0-1.6MPa, 0-2.5MPa, 0-4MPa and 0-6MPa. |
| Resolution and accuracy: | ±0.5%FS |
| Response time: | ≤1ms |
| Pressure Range: | -100kPa to 6MPa |
| Pressure Reference: | Gauge pressure, absolute pressure or sealed gauge pressure. |
| Working Temperature: | -30°C to 85°C |
| Diaphragm material: | 316L stainless steel |
WPCK63 Manual download
Get Price Whatsapp
Description
The WPCK63 series is a compact pressure transmitter based on a diffused silicon pressure sensor. It uses a highly reliable amplification circuit and wide temperature compensation to convert the pressure of the measured medium into a standard output signal. Its lightweight and compact design makes it easy to install and use.
The integrated stainless steel structure improves corrosion resistance. The cable is protected by a corrugated conduit, while the standard aviation connector helps meet pressure measurement and control requirements under different environmental conditions. Different outputs, pressure ranges and pressure interfaces can be customized according to application requirements.
Application
Gas pressure measurement, intelligent water supply systems, water treatment equipment, pneumatic control systems and hydraulic control systems.
Features
- Compact and lightweight;
- easy to install and use;
- integrated stainless steel construction;
- wide temperature compensation;
- high reliability;
- fast response;
- IP68 protection;
- multiple output options;
- customizable pressure interfaces and housing materials.
Specifications
| Pressure Range | -100kPa to 6MPa |
| Pressure Reference | Gauge Pressure / Absolute Pressure / Sealed Gauge Pressure |
| Output | 0.2-2.3V / I2C |
| Accuracy | ±0.5%FS |
| Compensation Temperature | Digital: -10°C to 70°C; Analogue: -20°C to 60°C |
| Hysteresis | 0.1%FS |
| Repeatability | 0.1%FS |
| Temperature Drift | ≤±0.03%FS/°C |
| Response Time | ≤1ms |
| Overload Pressure | 150%FS, 200%FS or 300%FS, depending on the pressure range |
| Working Life | ≥1×106 pressure cycles |
| Working Temperature | -30°C to 85°C |
| Storage Temperature | -40°C to 125°C |
| Long-term Stability | ≤±0.3%FS/year |
| Thread | M20×1.5; other thread types can be customized |
| Housing Material | 304 stainless steel |
| Diaphragm Material | 316L stainless steel |
| Protection Level | IP68 |
| Insulation Resistance | ≥100MΩ/100VDC |
| Electrical Connection | Cable with corrugated conduit and M12 aviation connector |
| Default Cable Length | 1m |
| Weight | 400g±30g |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
