Description
The ZW-TUR102 Turbidity Detection Module is a universal module. It detects the turbidity values of various solutions based on optical principles and delivers outstanding selectivity and stability.
Equipped with a built-in temperature sensor, it enables temperature compensation for output signals. Adopting TTL serial communication, the module is easy to operate and can significantly shorten users' design and development cycles. Combining optical detection technology with elaborate circuit design, it fully satisfies the detection requirements for multiple types of solutions.
Application
It is widely applicable to laboratory research, water plant water supply, wastewater treatment, aquaculture, household appliances and other fields.
Features
- Excellent stability & anti-interference performance with built-in temperature compensation, suitable for 5℃~80℃ working environment.
- Wide turbidity range 0~1000 NTU and linear output for accurate measurement.
- Low power design (5V, 10~15 mA), compact structure and fast stabilization (≤180s).
- Dual output of 0-5V voltage and TTL UART, easy to use and integrate.
- Long service life up to 3 years, widely used in water treatment, aquaculture, laboratory and home appliance fields.
Specifications
| Parameter | Specification |
|---|---|
| Operating Voltage | 5 V |
| Operating Current | 10 - 15 mA |
| Turbidity Range | 0 - 1000 NTU (±30) |
| Dimensions | 47.5 × 30 × 35 mm |
| Output Interface | UART (TTL) |
| Operating Temperature Range | 5 - 80 ℃ |
| Output Voltage | 0 - 5 V |
| Output Linearity | Linear |
| Stabilization Time | ≤ 180 s |
| Service Life | 3 years |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
