Description
This product is based on the PT200 thin-film platinum RTD independently developed by Winsen. As the temperature-sensing core, it is applied to the exhaust lines of gasoline/diesel vehicles and hybrid models, providing real-time monitoring of the operating temperatures of aftertreatment devices such as the three-way catalytic converter (TWC), DPF, and SCR, and supplying critical signals for engine thermal management and OBD diagnostics. Featuring a high-temperature-resistant alloy sheath, a vibration-resistant sealed structure, and an automotive-grade connector, it is capable of long-term operation in harsh exhaust environments.
Application
- Gasoline vehicles
- Diesel vehicles
- Hybrid vehicles
- Three-way catalytic converter (TWC) temperature monitoring
- Diesel particulate filter (DPF) temperature monitoring
- Selective catalytic reduction (SCR) temperature monitoring
- Engine thermal management
- OBD diagnostics
- Turbocharger exhaust temperature monitoring
Features
- Automotive-grade design of Pt platinum RTD
- High-precision temperature measurement
- High temperature resistance
- Fast response
- Vibration resistance
- Long service life
- High-temperature-resistant alloy sheath
- Vibration-resistant sealed structure
- Automotive-grade connector
Specifications
| Detection Temperature Range | −40 ~ 850 ℃ |
| Accuracy | ±3 ℃ at −40~200 ℃;1.5% of resistance value at >200 ℃ |
| Tube Cap | 310S stainless steel;6 mm round cap;3.2 mm flat cap |
| Sheathed Cable | Outer sheath: 310S stainless steel;Conductor material: Inconel 601;Outer diameter: 6 mm, 3.2 mm |
| Wire Insulation Material | Insulation tube: PTFE;Nickel-plated copper wire;Cross-sectional area: 2×0.5 mm²;Outer sheath: Silicone rubber |
| Nominal Resistance | 200 Ω at 0 ℃(refer to PT200 platinum resistance RTD table for details) |
| Nut | 304 stainless steel;M16×1.5, M14×1.5, M12×1.25 |
| Connector | Compatible with most mainstream plug types |
| Working Conditions | Thermal media, e.g., exhaust gas |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to [email protected]
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.