Description
This product is based on a glass micro-melting process, in which MEMS silicon strain gauges are permanently bonded onto a stainless steel elastomer through high-temperature sintering with special glass, replacing traditional organic adhesive bonding. It is applied to various pressure measurement points in gasoline/diesel vehicles, hybrid vehicles, and new energy vehicles, providing real-time monitoring of system pressures such as engine oil, fuel common rail, refrigerant, brake, transmission hydraulic, SCR urea, and gas pressure reduction, and supplying critical signals for engine thermal management and power control. Featuring an all-solid-state integrated structure, a high-temperature-resistant alloy sheath, and an automotive-grade connector, it has no creep and no aging failure, and can operate long-term in harsh working conditions involving wide temperature ranges, strong vibration, and corrosion.
Application
- Gasoline and diesel vehicles
- Hybrid vehicles
- New energy vehicles
- Engine oil pressure monitoring
- High-pressure fuel common rail monitoring
- Air-conditioning refrigerant pressure monitoring
- Brake system pressure monitoring
- Transmission hydraulic pressure monitoring
- Air suspension systems
- Mechanical hydraulic servo systems
- SCR urea system pressure monitoring
- Gas pressure reduction systems
Features
- Inorganic glass chemical bonding with no creep
- Fast response and rapid sensing
- Wide temperature range with ultra-low temperature drift
- High resistance to vibration and shock
- Stable and reliable performance
- Strong media compatibility
- All-solid-state integrated structure
- High-temperature-resistant alloy sheath
- Automotive-grade connector
Specifications
| Working Temperature | −40 ~ 140 ℃(subject to specific model and application) |
| Accuracy | ±0.5% F.S. / ±1% F.S. |
| Working Voltage | 5 ~ 32 V |
| Overload Pressure | 3 times the base range |
| Burst Pressure | 5 times the base range |
| Protection Rating | IP68 |
| Screw Interface | Customizable |
| Output | SENT / Analog |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to [email protected]
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.