| Target: | H2S |
| Model: | ZE830 |
| Detection range: | 0～100ppm |
| Detection principle: | Fuel-cell-type electrochemical sensing |
| Characteristics: | Low power consumption, high precision, high sensitivity, strong anti-interference capability, long service life, compact structure and flexible warning-point configuration. |
| Output signal: | CAN |
| Resolution and accuracy: | Resolution 0.1ppm; Accuracy ±1ppm below 10ppm and ±10% above 10ppm |
| Response time: | T90≤30s |
| Working Temperature: | -40℃～85℃ |
Get Price Whatsapp
Description
The hydrogen sulfide leakage sensor module is designed for installation inside solid-state battery packs for early warning and monitoring of thermal runaway.
The module combines a fuel-cell-type electrochemical H2S sensor, a high-performance microprocessor and specialized intelligent algorithms. Its compact, highly integrated structure supports easy installation and flexible warning-point configuration.
Application
Thermal Runaway Monitoring for Solid-State Batteries
Features
- Fuel-cell-type electrochemical sensing
- Low power consumption
- High precision
- High sensitivity
- Strong anti-interference capability
- Long service life
- High integration
- Compact structure
- Easy installation
- Flexible warning-point configuration
- CAN output
Specifications
| Technical Principle | Fuel-Cell-Type Electrochemical |
| Detection Target | H2S |
| Operating Voltage | 12V DC (9～16V DC) |
| Detection Range | 0～100ppm |
| Resolution | 0.1ppm |
| Detection Accuracy | ±1ppm (<10ppm); ±10% (>10ppm) |
| Response Time | T90≤30s |
| Output Mode | CAN |
| Operating Temperature | -40℃～85℃ |
| Operating Humidity | 0～100%RH |
| Storage Temperature | -40℃～85℃ |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
