Description
ZHMT101 is equipped with a variety of human body perception and environmental temperature hardware, and the intelligent algorithm integrates a variety of human body detection signals and environmental parameters to detect the existence of life in the vehicle and indicate the danger degree of the environment in which the life is located. The sensor is a high accuracy, intelligent vehicle life detection and warning solution.
Application
Detection of the presence of life in the vehicle and related hierarchical alarm
Features
- Stable and reliable
- Provide a variety of output methods
- Long service life
Specifications
Life Legacy Sensor | |
Detection principle | Infrared thermopile NDIR |
Detection target | Life form |
Detection range | Detection field of view range:0.6*1.4*0.6m CO2:400~5000ppm temperature:-55~125℃ |
Resolution ratio | CO2:1ppm temperature:±0.1℃ |
Detection accuracy | CO2:±(50+5% reading value) temperature:±0.5℃ |
Operating voltage | DC (9~16)V |
Operating current | 29mA~130mA |
Quiescent Current | 29mA |
Power consumption | Static power <0.3W, Peak:1.5W |
Response time | T90<30s |
Operating temperature | -40℃~85℃ |
Storage temperature | -40℃~95℃ |
Output mode | CAN/LIN(Customizable) |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.