Description
The ZD100 is a high-reliability module designed for radon concentration monitoring. It achieves precise and low-power detection by capturing alpha particles released from radon in the environment, featuring stable performance and rapid response. Data communication is handled via a UART interface. Its integrated design enables quick adaptation to various terminal devices. Powered by a 5V DC input, the module boasts a compact and flexible deployment structure, with a free-flowing design suitable for most civilian applications.
Application
Primarily designed for stationary radon detectors, it is ideal for long-term real-time monitoring of indoor radon levels in homes, schools, offices, and similar spaces.
Features
- Maintenance and calibration free
- UART signal output
- Small size
- High data refresh rate
- Long lifetime
Specifications
| product model | ZD100 |
| probe gas | radon gas |
| detection zone | 0~20000, unit: Bq/m3 |
| working voltage | DC 5 V±0.1V |
| working current | ≤10mA |
| output | UART output (TTL level, 3.3 V), 9600bps |
| preheating time | 3min |
| resolution ratio | 1Bq/m3 |
| Data refresh interval | 1 minute (4-hour moving average) |
| service environment | temperature：5℃～40℃ Humidity: 15% RH to 70% RH (no condensation) |
| Storage environment | temperature：-10℃～60℃ Humidity: 15% RH to 85% RH |
| outline dimension | 52.65mm×42.50mm×27.8mm |
| Product weight | Approximately 24.85 grams |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
