Description
AI-Nose is a multi-channel intelligent electronic nose system comprising six MEMS sensor units, offering flexible selection of 1–6 multi-channel operating modes. The product features signal filtering and temperature/humidity compensation, and supports deep integration with artificial intelligence algorithms to achieve a complete closed-loop capability spanning target gas capture, feature analysis, model building, and task identification.
Application
- Smart Home Appliances (refrigerators, air conditioners, microwaves, air purifiers, range hoods, etc.)
- Smart Vehicles (in-car and outdoor air quality monitoring, personalized smart interaction experiences, etc.)
- Industrial Safety (detection of toxic and hazardous gases, leak alarms, etc.)
- Healthcare (early-stage disease screening, patient condition monitoring, air quality monitoring in medical environments, etc.)
Features
- 6 gas channels for simultaneous, flexible selection
- Fast response and recovery times
- Supports integration of AI algorithm models
- Low power consumption
- Long service life
Specifications
| Item | Parameter |
|---|---|
| Product Model | ZM101-A |
| Product Type | MEMS Gas Sensor Array |
| Standard Package | Metal Package |
| Detected Gases and Ranges | NH₃: 1～100 ppm、VOC: 1～10 ppm NO₂: 0.1～10 ppm、H₂S: 0.5～10 ppm CO: 5～200 ppm、CH₄: 100～6000 ppm |
| Supply Voltage | DC 3.3V |
| Operating Current | ≤150 mA |
| Operating Power Consumption | ≤400 mW |
| Communication | UART |
| Warm-up Time | ≤120s |
| Operating Temperature | -40℃～85℃ |
| Operating Humidity | 5%RH-95%RH(non-condensing) |
| Storage Temperature | -40℃～85℃ |
| Connection Type | Pin（2.54mm/2P） |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory, but the module will be calibrated before leaving the factory.
However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
