| Target: | Alcohol |
| Model: | ZE30-C2H5OH |
| Detection range: | 0～5 ppm |
| Detection principle: | Module, electrochemical |
| Characteristics: | Alcohol detector, vehicle-mounted detector |
| Size: | 17.1x19.2x4.5mm |
| Working conditions: |
Resolution ≤0.01ppm Response time ≤60 seconds Working life 2 years (In the air) |
ZE30-C2H5OH Manual download
Get Price Whatsapp
Description
The ZE30-C2H5OH electrochemical alcohol module is a general-purpose, miniaturized module. The electrochemical principle is used to detect the presence of C2H5OH in the air, which has good selectivity and stability. Built-in temperature sensor for temperature compensation; digital output and analog voltage output for easy use. ZE30-C2H5OH is a universal gas module designed and manufactured by combining proven electrochemical detection technology with sophisticated circuit design.
Application
Alcohol detector, vehicle-mounted detector
Features
- High sensitivity, high resolution, low power consumption, long lifespan.
- UART and analog voltage output.
- Good stability and excellent anti-interference, temperature compensation, good linearity.
Specifications
| Model No. | ZE30-C2H5OH |
| Target Gas | Alcohol |
| Interference Gases | CO, etc. gas |
| Output Data | DAC (0.4~2V voltage is corresponding to 0~full scale) |
| UART Output (3VTTL electrical level) | |
| Working Voltage | 3.7~5.5V |
| Preheating Time | ≤3min |
| Response Time | ≤60 sec |
| Recovery Time | ≤60 sec |
| Detection range | 0~5 ppm |
| Resolution | ≤0.01ppm |
| Operating Environment | Temperature: -20～50℃ |
| Humidity: 15%-90％RH(no condensation) | |
| Storage Temperature | 0～25℃ |
| Working Life | 2 years (in air) |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory. However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
