| Target: | Natural gas,CH4 |
| Model: | ZP14 |
| Detection range: | 0-5000PPM,Resolution 50PPM |
| Detection principle: | Module，semiconductor |
| Characteristics: | Complete device development of household gas leak alarm. |
| Size: | 25×21.1×15 |
| Working conditions: |
Working voltage 3-5V Accuracy±3％LEL Response time＜30s |
ZP14 Manual download
Get Price Whatsapp
Description
ZP14 adopts plat surfaced semiconductor sensor and it has basic functions of household gas leak alarm: status indicator, buzzer, relay, output signal of electromagnetic valve; it also supplying resetting for alarm point. This module can be used for complete device development of household gas leak alarm.
Application
see manual
Features
see manual
Specifications
| Model | ZP14 |
| Detection gas | Natural gas |
| Alarm Threshold | 4000ppm |
| Type of Sensor | Flat surfaced semiconductor type |
| Response Time | < 30s |
| Resume Time | < 30s |
| Working Voltage | DC (3~5) V |
| Working Current | < 80mA |
| Output Range | 0~5000ppm |
| Accuracy | ±3％LEL (at 25℃) |
| Expected Life Span | >2 years |
| Working Conditions | Temperature: -10~55℃ |
| Humidity:0~95%RH | |
| Storage Conditions | Temperature: -20~70℃ |
| Humidity:20%~95%RH | |
| Dimension | 24×20.1×9mm(L×W×H) |
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Technical Support:
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory. However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to sales@winsensor.com
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
