MC101 Catalytic Flammable Gas Sensor
|Combustible gases such as domestic natural gas,LPG,coal gas,CH4,C3H8 and so on
|Bridge output voltage in linear, fast response, good repeatability and selectivity
MC101 Manual download
Get Price Whatsapp
MC101 adopts catalytic combustion principle, and its two arms of electric bridge consists of a test element and a compensate element. The resistance of the test element rises once it meets the combustible gases, in the same time, the output voltage of the bridge changes and the voltage variation rises in direct proportion to the gas concentration. The compensate element, as a conference, has the function of compensating temperature and humidity.
It is used in household occasion to detect the leakage or concentration of combustible gases such as natural gas, LPG, coal gas and so on.
- Bridge output voltage in linear
- Fast response
- Good repeatability and selectivity
- Resist H2S poisoning & organosilicone.
|Response Time (90%)
|Recovery Time (90%)
* The description and specifications might be changed without notice. Please contact us for the latest information before placing orders.
Customized technical design and function, LOGO and package are available without extra charge (including molding fee) for mass volume.
The sensors don't have sleeping mode. It can be set in program if needed.
All Winsen products go through strict inspections and tests to make sure they are 100% qualified before shipping out.
The sensor has been fully tested (not calibrated) before leaving the factory. However, after transportation and storage, the environment conditions change, and the surface of the sensor absorbs moisture, mixed gas, pollution matters, etc. It is recommended that customers perform aging and calibration after sensors become stable according to the program and use occasions of the whole device.
15﹪-90﹪RH without condensation,greater or less than this range or long-term high temperature and high humidity will affect the life of the sensor.
Our sensors are certified with CE, 3C, ROHS, anti-explosion, fire prevention, and coal mining safety according to different applications. And we provide assistance for new certification.
Many factors can cause the sensor to fail such as broken wires in transportation, poisoning, falling off of the sensitive material, damage to the heating wire (device), etc. Please find specific cause in each category with Winsen’s aftersales.
Winsen provides professional consultation and service before and after sales. We will recommend the best fitting sensor for your demand. If you have any problem, don’t hesitate to email us to firstname.lastname@example.org
Due to high volume of daily incoming emails and time zone difference, we may not be able to reply your emails immediately. But we will reply to your inquiry in 24 business hours.
LEADING GAS SENSING SOLUTION SUPPLIER
ZMT500-A Non-contact anti-dry probe
Infrared temperature measurement
Non-contact sensor, does not touch the bottom of the potVIEW MORE
ZE33 Water Heater Gas Leakage and Incomplete Combustion Detection Module
Sound and light alarm output, and PWM digital signal output modeVIEW MORE
MH-L1141A-U-100L Laser Sensor
Laser spectral absorption
High Sensitivity and resolution, low power consumption, small sizeVIEW MORE